FORUM.M.NU

Kod: Markera allt

<?
$output = shell_exec('sudo /var/www/wsp -A 19 --format "%N,%h,%H,%t,%T,%C,%c,%W,%G,%D,%d,%P,%p,%r,%f,%F,%R"');

$pos = strpos($output, 'NaN');

if ($pos === false) {
$del = explode(",", $output);

$username="XXXX";
$password="XXXX";
$database="XXXX";
mysql_connect("192.168.1.XXX",$username,$password);
@mysql_select_db($database) or die( "Unable to select database");
$query = "INSERT INTO t_station set f_datum='" . $del[0] . "', f_fukt_inne='" . $del[1] . "', f_fukt_ute='" . $del[2] . "', f_temp_inne='" . $del[3] . "', f_temp_ute='" . $del[4] . "', f_dagg='" . $del[5] . "', f_vindavkyl='" . $del[6] . "', f_vind_hastighet='" . $del[7] . "', f_vind_pust='" . $del[8] . "', f_vind_riktning='" . $del[9] . "', f_vind_grader='" . $del[10] . "', f_tryck_abs='" . $del[11] . "', f_tryck_rel='" . $del[12] . "', f_regn_1h='" . $del[13] . "', f_regn_24h='" . $del[14] . "', f_regn_l24h='" . $del[15] . "', f_regn_total='" . $del[16] . "'";
mysql_query($query);
mysql_close();
}

?>

Kod: Markera allt

sudo /var/www/wsp -A 19 --format "%N,%h,%H,%t,%T,%C,%c,%W,%G,%D,%d,%P,%p,%r,%f,%F,%R"
2013-09-03 10:49:00,56,50,19.6,18.7,8.1,18.7,0.3,1.7,NW,315,1012.8,1014.2,0.0,0.0,0.0,11.1

Kod: Markera allt

Use --help for more options.

Indoor:
  Temperature:          19.6 C
  Humidity:             56%

Outdoor:
  Temperature:          19.3 C
  Wind chill:           19.3 C
  Dewpoint:             8.0 C
  Humidity:             48%
  Absolute pressure:    1012.7 hPa
  Relative pressure:    1012.7 hPa
  Average windspeed:    0.7 m/s
  Gust wind speed:      1.4 m/s
  Wind direction:       270 W
  Total rain:           11.1 mm

Kod: Markera allt

Weather Station Poller v1.0 build 30
Copyright (C) Joakim Söderberg.
  Usage: ./wsp [option]...

  -e, --easyweather     Outputs the weather data in the
                        easyweather.dat csv format.
  --weatherstats        Outputs the weather data in the
                        format for weatherstats.
  -s, --status          Shows status of the device, such
                        as data count, date/time.
  --settings            Prints the weather display's settings.
  --maxmin              Outputs the max/min weather data
                        recorded by the station.
  --alarms              Displays all alarms set on the device
                        and if they're enabled.
  -c, --count #         The number of history items to read (1-4080).
                        Default is 1.
  -a, --all             Gets all available history items.
  -v[v..]               Shows extra debug information. For more
                        detailed info, add more v's.
  -t, --timezone #      Sets the timezone offset from CET
                        from -12 to 12.
  -d, --delay #         Sets the read update delay between
                        weather data readings.
  -A, --altitude #      Sets the altitude in m over sea level in meters.
                        This is not saved anywhere, so it needs to be on
                        specified on each call. Used to calculate
                        relative pressure.
  --quickrain           Enables faster, and potentially inaccurate rain
                        calculations. Instead of checking the time between
                        each history item to get the accurate timestamp
                        the delay is used. This will result in incorrect
                        values if you changed the delay without resetting
                        the memory. Notice that rain over 1h, 24h and so on
                        might be calculated incorrectly.
  --vendorid #          Changes the vendor id, should be in hex format.
                        Default is 1941.
  --productid #         Changes the product id, shoulb be in hex format.
                        Default is 8021.
  --format <string>     Writes the output in the given format.
  --formatlist          Lists available format string variables.
  --dumpmem <path>      Dumps the entire weather station memory to a file.
  --infile <path>       Uses a file as input instead of reading from the
                        weather station memory. Use output from --dumpmem.
  --summary             Shows a small summary of the last recorded weather.
  -h, --help            Shows this help text.